The Dacor HCT365GS cooktop has 5 burners that produce 9,001 BTU, 11,000 BTU, 12,000 BTU and 18,000 BTU. The center burner is a double burner that produces an ultra low simmer flame. These brass orifices are a replacement for appliances that use male threaded orifices. This cooktop comes with a regulator that is set for 5″ WC on its Natural Gas setting. Many cooktops, free standing stoves, bar-b-ques, and rangetops use these types of orifices and they will retrofit a number of other units which usually feature a sealed burner design.

This set includes 6 orifices for a stove with 4 single burners and a double burner (the center one). Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator. FOB origin.

These are orifices specifically to do a NATURAL GAS TO PROPANE conversion on Dacor Model #ERD48 cooktops The 6 top side orifices to support the 15,000 BTU flames, while the broiler orifice supports the oven broiler. These orifices are prepared for PROPANE use employing the stock regulator rated set for PROPANE rated at 10″ W.C. Many cooktops, free standing stoves, bar-b-ques, and rangetops use these types of orifices and they will retrofit a number of other units which usually feature a sealed burner design.

This set includes 7 orifices for a stove with up to 6 burners. This kit also included 6 jets to support low flame functionality. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

This is a kit to convert the Dacor ESG486 and Dacor ESG 366 from Propane (LP) to Natural Gas. This range incorporates orifices for its 6 topside burners. The low heat function on the two largest burners use orifices that produce an ultra low BTU rating to enable delicate gourmet sauces to cook on low heat indefinitely. The regulator is convertible between Natural Gas is rated at 5″ WC and LP is rated at 10″ WC.

These brass orifices are a replacement for appliances that use male threaded orifices. The pointed orifices are for the top side and broiler, while the special orifice jets fit into the burner control knob assembly to control the low flame..

Note: If you’re converting a model for high altitude use, please contact seller.

This set includes 6 orifices and 6 bypass needles (jets) for a cooktop with 6 burners. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator. FOB origin.

These are orifices specifically to do a NATURAL GAS TO PROPANE conversion on Dacor Model #ERD48 cooktops The 6 top side orifices to support the 15,000 BTU flames, while the broiler orifice supports the oven broiler. These orifices are prepared for PROPANE use employing the stock regulator rated set for PROPANE rated at 10″ W.C. Many cooktops, free standing stoves, bar-b-ques, and rangetops use these types of orifices and they will retrofit a number of other units which usually feature a sealed burner design.

This set includes 7 orifices for a stove with up to 6 burners. This kit also included 6 jets to support low flame functionality. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

The Dacor model# DYRP48 is a 48″ range with 6 fired burners and two electric ovens below. These units have extreme precision specialty burners that use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the other orifice is used for high intensity heated cooking. There are 2 distinctly sized burners (2 of one type at the front left and front right, and 4 of the other type) that requires 4 distinct types of precision machined orifices, such as the ones in this kit. The propane output pressure at the regulator is rated at 5″ W.C.

This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs.

It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. FOB origin.

The Dacor EOG36 is the ultimate gourmet cooking appliance for the sophisticated outdoor chef. This kit is designed to convert this unit from natural gas to propane (LP). These are orifice blanks and must be bored, so contact seller before purchasing if you need them precision drilled on a lathe to factory spec. The kit contains 3 main burner orifices to handle 6 rows of main barbecue elements and a single orifice to handle the rear radiant infrared rotisserie burner.These burners are factory rated at 70.000 BTU for the main burners and 13,500 BTU for the rear infrared burner.

These orifices are bored to factory specs, so they are ready to install. FOB origin.