This listing is specifically for the DCS-304 to convert the unit from natural gas to propane. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory guide is included.

This kit includes orfices for all 4 open top burners (2 for each 16,000 BTU burner which are actually two part burners; 6 orifices for the middle simmer burner, and 6 orifices for the outer high heat burners, one orifice for the broiler and one orifice for the main oven burner. Contact seller if you range includes different equipment. The stock manifold output pressure for natural gas must be factory spec at 5.0″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

This listing is specifically for the RG-364GD to convert the unit from propane to natural gas. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory guide is included.

This kit includes orfices for all 4 open top burners (2 for each 16,000 BTU burner which are actually two part burners; 6 orifices for the middle simmer burner, and 6 orifices for the outer high heat burners, one orifice for the broiler, one orifice for the main oven burner and one orifice for the griddle. Contact seller if you range includes different equipment. The stock manifold output pressure for natural gas must be factory spec at 5.0″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

These brass orifices are a replacement for converting the DCS RG-486GD from natural gas to propane (LP).

This set includes 15 orifices that are bored to size to fit this specific application for this specific unit. DCS cooktops come from the factory with a dual gas regulator rated at 10″W.C. (Propane) and 5″W.C. (Natural Gas) and they can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual. No other parts should be required to complete the conversion, so long as your stove uses a dual gas regulator.

This kit contains parts to convert each of the conventional topside burners. Each burner uses two orifices: the short one for the high heat flame and the long one for the low heat flame.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

This listing is specifically for the RG-488 range to convert the unit for use with natural gas. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory guide is included.

This set includes 17 orifices for a stove with up to 17 burners to convert this unit from natural gas to propane. This kit includes orfices for all 6 open top burners (2 for each 16,000 BTU burner which is actually divided into two parts for each burner; 6 for the middle stove top simmer burners. and 6 for the outer stove top burners), one orifice for the grill (or griddle -depends on your set up) of 18,000 BTU, one orifice for the main oven with 30,000 BTU, one orifice for the 12 inch warming oven of 18,000 BTU, one orifice for the broiler of 19,000 BTU and another orifice for the RGA broiler of 16,000 BTU. Contact seller if you range includes a 30,000 BTU WOK. The stock manifold output pressure for natural gas must be factory spec at 5″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

This kit is specifically for the DCS RGS-366 range which has 6 topside burners with high and low orifices, and an oven with a broiler. The double burners at the top of this range are unparalleled when it comes to flame control throughout the sweep from ultra low flame to high flame.Other DCS range kits are available. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory conversion guide is included.

This set includes 14 orifices for a stove with up to 8 burners to convert this unit from natural gas to propane. This kit includes orfices for all 6 open top burners (2 for each 15,000 BTU (this is the propane rating for these burners) open top burner which is actually divided into two parts for each burner; 6 for the middle stove top simmer burners and 6 for the outer stove top high burners, one orifice for the main oven burner rated at 30,000 BTU, and one orifice for the broiler of 19,000 BTU. Contact seller if you range includes a 30,000 BTU WOK or a RGA broiler. The stock manifold output pressure for propane must be factory spec at 10.0″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

This listing is specifically for the DCS-RGS-485GD range to convert the unit for use with Natural Gas. Other DCS range kits are available. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory conversion guide is included.

This set includes 15 orifices for a stove with up to 10 burners to convert this unit from natural gas to propane. This kit includes orfices for all 5 open top burners (2 for each 17,500 to 18, 000 BTU – this is how the manufacturer describes the burner heat rating – open top burner which is actually divided into two parts for each burner; 5 for the low intensity middle stove top simmer burners, 5 for the outer stove top burners which require, two orifices for the griddle (or grille -depends on your set up) of 24,000 BTU, one orifice for the main oven with 30,000 BTU, one orifice for the 12 inch warming oven of 18,000 BTU, and one orifice for the broiler of 19,000 BTU. Contact seller if you range includes a 30,000 BTU WOK or a RGA broiler. The stock manifold output pressure for propane must be factory spec at 5.0″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

This listing is specifically for the DCS-RGT-305 range to convert the unit FROM NATURAL GAS TO PROPANE (LP). Other DCS range kits are available. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory conversion guide is included.

This set includes 12 orifices for a stove with up to 7 burners (five of these burners use two orifices; one for high heat, the other for low heat) to convert this unit from natural gas to propane. This kit includes orifices for all 5 open top burners (2 for each 17,500 to 16, 000 BTU – this is how the manufacturer describes the burner heat rating – open top burner which is actually divided into two parts for each burner; 5 for the low intensity middle stove top simmer burners, and 5 for the outer stove top burners. The larger orifices are for the main oven with 30,000 BTU, and the other is for the broiler rated at 19,000 BTU. Contact seller if you range includes a 30,000 BTU WOK or a RGA broiler. The stock manifold output pressure for propane must be factory spec at 5.0″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

These brass orifices are a replacement for converting the DCS RGTC-305-N from propane (LP) to natural gas (NG).

This set includes 12 orifices that are bored to size to fit this specific application for this specific unit. DCS cooktops come from the factory with a dual gas regulator rated at 10″W.C. (Propane) and 5″W.C. (Natural Gas) and they can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual. No other parts should be required to complete the conversion, so long as your stove uses a dual gas regulator.

This kit contains parts to convert each of the conventional topside burners. Each burner uses two orifices: the short one for the high heat flame and the long one for the low heat flame. The grille orifice is adjustable on this model, so one is NOT included in this kit.

International buyers, please inquire about international shipping rates before ordering. FOB origin.