The Dacor model# DYRTP48 is a 48″ rangetop with 6 fired burners. These units have extreme precision specialty burners which use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the other orifice is used for high intensity heated cooking. There are 2 distinctly sized burners (2 of one type at the front left and front right, and 4 of the other type) that requires 4 distinct types of precision machined orifices, such as the ones in this kit. The propane output pressure at the regulator is rated at 5″ W.C.

This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs.

It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. FOB origin.

This kit is intended to specifically convert the Dacor model# DOPA18M9CSM/KD range from Propane (LP) to Natural Gas. This is a 36″ range with 6 fired top side burners and a single electric oven below. These units have extreme precision specialty burners which use two ultra precision orifices each on 5 burners and 3 for a single burner to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the other orifice(s) is/are used for high intensity heated cooking. There are 4 distinctly sized burners (3 of one type, and 3 distinctly defferent burners) with a staggered array on this unit and that required several distinct types of precision machined orifices like the ones in this kit. The propane output pressure at the regulator is rated at 10″ W.C., while the Natural Gas setting on this range is rated at 5″W.C.

It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual for details. FOB origin.

These are orifices specifically to do a NATURAL GAS TO PROPANE conversion on Dacor Model #ERD48 cooktops The 6 top side orifices to support the 15,000 BTU flames, while the broiler orifice supports the oven broiler. These orifices are prepared for PROPANE use employing the stock regulator rated set for PROPANE rated at 10″ W.C. Many cooktops, free standing stoves, bar-b-ques, and rangetops use these types of orifices and they will retrofit a number of other units which usually feature a sealed burner design.

This set includes 7 orifices for a stove with up to 6 burners. This kit also included 6 jets to support low flame functionality. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

These are orifices specifically to do a PROPANE TO NATURAL GAS conversion on Dacor Model #ERD48 cooktops The top side orifices support the 15,000 BTU output while the broiler orifice supports the broiler flame using the stock regulator rated set for NATURAL GAS rated at 5″ W.C. Many cooktops, free standing stoves, bar-b-ques, and rangetops use these types of orifices and they will retrofit a number of other units which usually feature a sealed burner design.

This set includes 7 orifices for a stove with up to 6 burners and 1 natural gas broiler orifice. A compliment of 6 low flame jets are also included. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

This kit is intended to specifically convert the Dacor model# HDPR36S/NG range from Natural Gas to Propane (LP). This is a 36″ range with fired top side burners and a single electric oven below. These units have extreme precision specialty burners which use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the other orifice is used for high intensity heated cooking. There are 3 distinctly sized burners (2 of each type) with a staggered array on this unit and that required 6 distinct types of precision machined orifices, such as the ones in this kit. The propane output pressure at the regulator is rated at 10″ W.C., while the Natural Gas setting on this range is rated at 5″W.C.

It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual for details. FOB origin.

This is a kit to convert the Dacor ESG486 and Dacor ESG 366 from Natural Gas to Propane (LP). This range incorporates orifices for its 6 topside burners. The low heat function on the two largest burners use orifices that produce an ultra low BTU rating to enable delicate gourmet sauces to cook on low heat indefinitely. The regulator is convertible between Natural Gas is rated at 5″ WC and LP is rated at 10″ WC.

These brass orifices are a replacement for appliances that use male threaded orifices. The larger orifices are used for the top side orifices and the broiler, and the special orifice jets that fit into the burner control knob assembly. The top side orifices produce 15,000 BTU for the upper burners and the low heat is achieved through the bypass needle (located in the main control knob body).

Note: If you’re converting one of these ranges for propane used at high altitude, please contact seller.

This set includes 6 orifices and 6 bypass needles (jets) for a cooktop with 6 burners. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator. FOB origin.