-
$119.70
These brass orifices are a replacement for converting the Termador cooktop, rangetops and free standing stoves from propane (LP) to natural gas.
This set includes 6 orifices that are bored to size to fit this specific application for this specific unit. Thermador cooktops come from the factory with a dual gas regulator rated at 10″W.C. (Propane) and 5″W.C. (Natural Gas) and they can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual. No other parts should be required to complete the conversion, so long as your stove uses a dual gas regulator.
International buyers, please inquire about international shipping rates before ordering. FOB origin.
-
$84.90
This is a kit that will enable a conversion from Propane to Natural Gas on the Thermador SGSX365. The factory fuel regulator can be switched between 5″ WC Natural Gas to 10″WC for Propane (LP). This unit has 5 topside burners with three different heat ratings as follows; Left Rear and Right Front (1 each) are rated at 12,000 BTU, center (1 burner) at 18,000 BTU, and Left Front and Right Rear at 9,100 BTU.
It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. FOB origin.
-
$84.90
This is a kit that will enable a conversion from Propane to Natural Gas on the Thermador SGSX365. The factory fuel regulator can be switched between 5″ WC Natural Gas to 10″WC for Propane (LP). This unit has 5 topside burners with three different heat ratings as follows; Left Rear and Right Front (1 each) are rated at 12,000 BTU, center (1 burner) at 18,000 BTU, and Left Front and Right Rear at 9,100 BTU.
It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. FOB origin.
-
$84.90
This is a kit that will enable a conversion from Propane to Natural Gas on the Thermador SGSX365. The factory fuel regulator can be switched between 10″WC for Propane (LP) to 5″ Natural Gas. This unit has 5 topside ,burners with three different heat ratings as follows; Left Rear and Right Front (1 each) are rated at 12,000 BTU, center (1 burner) at 15,000 BTU, and Left Front and Right Rear at 8,000 BTU.
It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. FOB origin.
-
$84.90
This is a kit that will enable a conversion from Propane to Natural Gas on the Thermador SGSX365. The factory fuel regulator can be switched between 10″WC for Propane (LP) to 5″ Natural Gas. This unit has 5 topside ,burners with three different heat ratings as follows; Left Rear and Right Front (1 each) are rated at 12,000 BTU, center (1 burner) at 15,000 BTU, and Left Front and Right Rear at 8,000 BTU.
It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. FOB origin.
-
$66.50
Factory instructions are included. This set includes 3 orifices for a grille with up to 3 main burners. These brass orifices are a replacement for grilles that use male threaded orifices. Many bar-b-ques use these types of orifices, and they might retrofit a number of other brands. These are made for that specific Weber model with front control knobs (not side knobs) made after 2010.
The hose on this regulator is considerably longer than the original equipment hose that came with Weber grilles, stretching some 27 inches from the tank. Other manual adjustments might be necessary, so check your factory instruction manual details. FOB Origin.
-
$68.25
Factory instructions are included. This set includes 3 orifices for a grille with up to 3 main burners. These brass orifices are a replacement for grilles that use male threaded orifices. Many bar-b-ques use these types of orifices, and they might retrofit a number of other brands. These are made for that specific Weber model with side mounted control knobs.
The hose on this regulator is considerably longer than the original equipment hose that came with Weber grilles, stretching some 27 inches from the tank. Other manual adjustments might be necessary, so check your factory instruction manual details. FOB Origin.
-
$55.50
Factory instructions are included. This set includes 4 orifices for a grille with 3 three main burners, and a side plate burner. Unless otherwise specified, they will be custom bored for use with natural gas rated at 7″ WC for this application only. Please contact seller if you’re planning to install a fuel regulator in line with your grille. These brass orifices are a replacement for grilles that use male threaded orifices. Many bar-b-ques use these types of orifices, and they might retrofit a number of other brands. These are made for that specific Weber model with front control knobs (not side knobs) made after 2010. FOB Origin.
-
$72.50
Factory instructions are included. This set includes 4 orifices for a grille with 3 three main burners, and a side plate burner. Many bar-b-ques use these types of orifices and they might retrofit a number of other brands. These are made for that specific Weber model with front control knobs (not side knobs) made after 2010.
These orifices are specifically bored for use with an North American Weber grille using a common and inexpensive regulator that you can purchase at Home Depot, Lowes or Ace with a propane tank mounted underneath the grille. Please contact seller if your grille or installation is different. FOB Origin.
-
$53.80
Factory instructions are included. This set includes 3 orifices for a grille with 3 main burners. These brass orifices are a replacement for grilles that use male threaded orifices. Unless otherwise specified, they will be custom bored for use with natural gas rated at 7″ WC for this application only. Please contact seller if you’re planning to install a fuel regulator in line with your grille. Many bar-b-ques use these types of orifices, and they might retrofit a number of other brands. These are made for that specific Weber model with knobs mounted on the side deck and a stove style burner located on the deck to the left side of the barbecue hood.
Other manual adjustments might be necessary, so check your factory instruction manual details. FOB origin.
-
$72.00
Factory instructions are included. This set includes 4 orifices for a grille with 3 three main burners and a side plate burner. Many bar-b-ques use these types of orifices, and they might retrofit a number of other brands. These are made for that specific Weber model with side control knobs.
These orifices are specifically bored for use with an North American Weber grille using a common and inexpensive regulator that you can purchase at Home Depot, Lowes or Ace with a propane tank mounted underneath the grille. Please contact seller if your grille or installation is different. FOB Origin.
-
$67.25
Factory instructions are included. This set includes 3 orifices for a grille with up to 3 main burners. These brass orifices are a replacement for grilles that use male threaded orifices. Many bar-b-ques use these types of orifices, and they might retrofit a number of other brands. These are made for that specific Weber model with side mounted control knobs.
The hose on this regulator is considerably longer than the original equipment hose that came with Weber grilles, stretching some 27 inches from the tank. Other manual adjustments might be necessary, so check your factory instruction manual details. FOB Origin.
-
$49.50
Factory instructions are included. This set includes 3 orifices for a grille with up to 3 main burners. These brass orifices are a replacement for grilles that use male threaded orifices. Unless otherwise specified, they will be custom bored for use with natural gas rated at 7″ WC for this application only. Please contact seller if you’re planning to install a fuel regulator in line with your grille. Many bar-b-ques use these types of orifices, and they might retrofit a number of other brands. These are made for that specific Weber Genesis B model with knobs on the side deck. Manual adjustments might be necessary, so check your factory instruction manual details. International buyers, please inquire about international shipping rates before ordering. FOB origin.
-
$68.50
Factory instructions are included. This set includes 3 orifices for a grille with up to 3 main burners. These brass orifices are a replacement for grilles that use male threaded orifices. Many bar-b-ques use these types of orifices, and they might retrofit a number of other brands. The hose on this regulator is considerably longer than the original equipment hose that came with Weber grilles, stretching some 27 inches from the tank. Other manual adjustments might be necessary, so check your factory instruction manual details. FOB Origin.
-
$49.50
Factory instructions are included. This set includes 3 orifices for a grille with up to 3 main burners. These brass orifices are a replacement for grilles that use male threaded orifices. Unless otherwise specified, they will be custom bored for use with natural gas rated at 7″ WC for this application only. Many bar-b-ques use these types of orifices, and they might retrofit a number of other brands. These are made for that specific Weber model with front control knobs (not side knobs) made after 2010. FOB Origin.
-
$43.80
Factory instructions are included. This kit comes with 3 orifices for a unit with 3 main burners. These brass orifices are a replacement for grilles that use male threaded orifices. Unless otherwise specified, they will be custom bored for use with natural gas rated at 7″ WC for this application only. Please contact seller if you’re planning to install a fuel regulator in line with your grille. Many bar-b-ques use these types of orifices, and they might retrofit a number of other brands. These are made for that specific Weber model with knobs mounted on the side deck.
Other manual adjustments might be necessary, so check your factory instruction manual details. FOB origin.
 |
