These are orifices specifically to do a NATURAL GAS TO PROPANE conversion on Dacor Model ERDE48 cooktops The 6 top side orifices to support the 15,000 BTU flames, while the broiler orifice supports the oven broiler. These orifices are prepared for PROPANE use employing the stock regulator rated set for PROPANE rated at 10″ W.C. Many cooktops, free standing stoves, bar-b-ques, and rangetops use these types of orifices and they will retrofit a number of other units which usually feature a sealed burner design.

This set includes 7 orifices for a stove with up to 6 burners. This kit also included 6 jets to support low flame functionality. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

The Dacor model# DYRTP48 is a 48″ rangetop with 6 fired burners. These units have extreme precision specialty burners which use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the other orifice is used for high intensity heated cooking. There are 2 distinctly sized burners (2 of one type at the front left and front right, and 4 of the other type) that requires 4 distinct types of precision machined orifices, such as the ones in this kit. The propane output pressure at the regulator is rated at 5″ W.C.

This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs.

It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. FOB origin.

This kit is designed to conver the Dacor model# ER36DSCH range from propane (LP) to natural gas. This is a 48″ range with fired top side burners and a single electric oven below. These units have extreme precision specialty burners which use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the other orifice is used for high intensity heated cooking. There are 3 distinctly sized burners (2 of each type) with a staggered array on this unit and that required 6 distinct types of precision machined orifices, such as the ones in this kit. The natural gas output pressure at the regulator is rated at 5″ W.C., while the LP rating is 10″ W.C.

This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs.

It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual for details. FOB origin.

The Dacor EOG36 is the ultimate gourmet cooking appliance for the sophisticated outdoor chef. This kit is designed to convert this unit from natural gas to propane (LP). These are orifice blanks and must be bored, so contact seller before purchasing if you need them precision drilled on a lathe to factory spec. The kit contains 3 main burner orifices to handle 6 rows of main barbecue elements and a single orifice to handle the rear radiant infrared rotisserie burner.These burners are factory rated at 70.000 BTU for the main burners and 13,500 BTU for the rear infrared burner.

These orifices are bored to factory specs, so they are ready to install. FOB origin.

These are orifices specifically to convert a Dacor Model #OGC52 grille from propane to natural gas using the stock (manufacturer’s original) regulator rated for propane rated at 4.0″ W.C. You must contact this seller if the regulator on your grille is NOT the regulator mentioned here. This unit has three main burners and a rotisserie burner under the hood with two side plate (stove style) burners on the side deck.

This set includes 6 orifices for a stove with up to 6 burners. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

The Dacor ER36GSCH cooktop has 6 burners that produce 9,500 BTU, 15,000 BTU, and 18,500 BTU. The front right and front left burners are double burners that produce an ultra low simmer flames at the inner circle and high intensity flames at the outer burner. These brass orifices are a replacement for appliances that use male threaded orifices. This cooktop comes with a regulator that is set for 10″ WC on its propane (LP) setting. The low heat burner orifice is a specialty part that has a custom drilled center that acts as it’s own venturi to help the low flame gas charge expand. Many cooktops, free standing stoves, bar-b-ques, and rangetops use these types of orifices and they will retrofit a number of other units which usually feature a sealed burner design.

This set includes 8 orifices for a stove with 4 single burners and 2 double burner (the front left and front right burners). Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator. FOB origin.