This is a kit to convert the Dacor ERD30S06CH range from Natural Gas to Propane (LP). This range incorporates orifices for its 4 burners and an additional orifice for the broiler. The low heat function uses jets that produce a fuel stream that enables an ultra low BTU rating that is low enough to roll delicate gourmet sauces on all 4 top side burners. The regulator is convertible, so Natural Gas is rated at 4″ WC and LP is rated at 10″ WC.

These brass orifices and jets are a replacement for appliances that use male threaded orifices.

This set includes 5 orifices for a range with up to 4 topside burners and a main oven broiler. The low heat jets must also be swapped with the 4 supplied jets to enable an ultra low simmer heat. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator. FOB origin.

These are orifices specifically to do a NATURAL GAS TO PROPANE conversion on Dacor Model #ERD48 cooktops The 6 top side orifices to support the 15,000 BTU flames, while the broiler orifice supports the oven broiler. These orifices are prepared for PROPANE use employing the stock regulator rated set for PROPANE rated at 10″ W.C. Many cooktops, free standing stoves, bar-b-ques, and rangetops use these types of orifices and they will retrofit a number of other units which usually feature a sealed burner design.

This set includes 7 orifices for a stove with up to 6 burners. This kit also included 6 jets to support low flame functionality. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

These are orifices specifically to convert a Dacor Model #OGC52 grille from propane to natural gas using the stock (manufacturer’s original) regulator rated for propane rated at 4.0″ W.C. You must contact this seller if the regulator on your grille is NOT the regulator mentioned here. This unit has three main burners and a rotisserie burner under the hood with two side plate (stove style) burners on the side deck.

This set includes 6 orifices for a stove with up to 6 burners. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

The Dacor model# DYRP48 is a 48″ range with 6 fired burners and two electric ovens below. These units have extreme precision specialty burners that use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the other orifice is used for high intensity heated cooking. There are 2 distinctly sized burners (2 of one type at the front left and front right, and 4 of the other type) that requires 4 distinct types of precision machined orifices, such as the ones in this kit. The propane output pressure at the regulator is rated at 5″ W.C.

This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs.

It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. FOB origin.

The Dacor EOG36 is the ultimate gourmet cooking appliance for the sophisticated outdoor chef. This kit is designed to convert this unit from propane to natural gas using the factory regulator rated at 4″ WC on it’s natural gas setting. Please contact seller if your unit’s regulator is not rated at 4″WC. The kit contains 3 main burner orifices to handle 6 rows of main barbecue elements totaling nearly 70,000 BTU factory rated heat output. The rotisserie on the rear wall is capable of 13,500 BTU factory rated heat output.

These orifices are bored to factory specs, so they are ready to install. FOB origin.

This is a kit to convert the Dacor PGM365-1S from Propane (LP) to Natural Gas. This range incorporates orifices for its 5 topside burners. The low heat function on the two largest burners use orifices that produce an ultra low BTU rating to enable delicate gourmet sauces to cook on low heat indefinitely. The regulator is convertible, so Natural Gas is rated at 5″ WC and LP is rated at 10″ WC.

These brass orifices are a replacement for appliances that use male threaded orifices. The large teepee shaped orifices handle large burner (18,000 BTU – left front dual burner). The spuds consist of 2 orifces for the small 9,500 BTU burners – (left rear, right rear), and one for the medium 12,500 BTU burner (center rear).

This set includes 7 orifices for a cooktop with 5 burners. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator. FOB origin.