This listing is specifically for the DCS-RGT-305 range to convert the unit from propane (LP) TO Natural Gas. Other DCS range kits are available. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory conversion guide is included.

This set includes 12 orifices for a stove with up to 7 burners (five of these burners use two orifices; one for high heat, the other for low heat) to convert this unit from natural gas to propane. This kit includes orifices for all 5 open top burners (2 for each 17,500 to 16, 000 BTU – this is how the manufacturer describes the burner heat rating – open top burner which is actually divided into two parts for each burner; 5 for the low intensity middle stove top simmer burners, and 5 for the outer stove top burners. The larger orifices are for the main oven with 30,000 BTU, and the other is for the broiler rated at 19,000 BTU. Contact seller if you range includes a 30,000 BTU WOK or a RGA broiler. The stock manifold output pressure for propane must be factory spec at 5.0″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

This listing is specifically for the DCS-304 to convert the unit from natural gas to propane. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory guide is included.

This kit includes orfices for all 4 open top burners (2 for each 16,000 BTU burner which are actually two part burners; 6 orifices for the middle simmer burner, and 6 orifices for the outer high heat burners, one orifice for the broiler and one orifice for the main oven burner. Contact seller if you range includes different equipment. The stock manifold output pressure for natural gas must be factory spec at 5.0″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

This listing is specifically for the DCS-RGT-305 range to convert the unit FROM NATURAL GAS TO PROPANE (LP). Other DCS range kits are available. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory conversion guide is included.

This set includes 12 orifices for a stove with up to 7 burners (five of these burners use two orifices; one for high heat, the other for low heat) to convert this unit from natural gas to propane. This kit includes orifices for all 5 open top burners (2 for each 17,500 to 16, 000 BTU – this is how the manufacturer describes the burner heat rating – open top burner which is actually divided into two parts for each burner; 5 for the low intensity middle stove top simmer burners, and 5 for the outer stove top burners. The larger orifices are for the main oven with 30,000 BTU, and the other is for the broiler rated at 19,000 BTU. Contact seller if you range includes a 30,000 BTU WOK or a RGA broiler. The stock manifold output pressure for propane must be factory spec at 5.0″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

This listing is specifically for the RG-488 range to convert the unit for use with propane. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory guide is included.

This set includes 17 orifices for a stove with up to 17 burners to convert this unit from natural gas to propane. This kit includes orfices for all 6 open top burners (2 for each 16,000 BTU burner which is actually divided into two parts for each burner; 6 for the middle stove top simmer burners. and 6 for the outer stove top burners), one orifice for the grill (or griddle -depends on your set up) of 18,000 BTU, one orifice for the main oven with 30,000 BTU, one orifice for the 12 inch warming oven of 18,000 BTU, one orifice for the broiler of 19,000 BTU and another orifice for the RGA broiler of 16,000 BTU. Contact seller if you range includes a 30,000 BTU WOK. The stock manifold output pressure for propane must be factory spec at 10.0″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

This listing is specifically for the DCS-RGS-366 range to convert the unit for use with Natural Gas. Other DCS range kits are available. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory conversion guide is included.

This set includes 14 orifices for a stove with up to 8 burners to convert this unit from natural gas to propane. This kit includes orfices for all 6 open top burners (2 for each 17,500 to 18, 000 BTU – this is how the manufacturer describes the burner heat rating – open top burner which is actually divided into two parts for each burner; 6 for the low intensity middle stove top simmer burners, 6 for the outer stove top burners which require, two orifices for the griddle (or grille -depends on your set up) of 24,000 BTU, one orifice for the main oven burner with 30,000 BTU, and one orifice for the broiler of 19,000 BTU. Contact seller if you range includes a 30,000 BTU WOK or a RGA broiler. The stock manifold output pressure for propane must be factory spec at 5.0″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.