This is a kit to convert the Dacor ERDE-36 from propane (LP) to natural gas. This range incorporates orifices for its 6 topside burners. The regulator is convertible between Natural Gas is rated at 5″ WC and LP is rated at 10″ WC.

These brass orifices are a replacement for appliances that use male threaded orifices. The larger orifices are used for the top side orifices and the broiler, and the special orifice jets that fit into the burner control knob assembly. The top side orifices are for the high heat function while the low heat is achieved through the bypass needle (located in the main control knob body).

Note: If you’re converting one of these ranges for propane used at high altitude, please contact seller.

This set includes 6 orifices and 6 bypass needles (jets) for a cooktop with 6 burners. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator. FOB origin.

This is a kit to convert the Dacor ERDE-36 from Natural Gas to Propane (LP). This range incorporates orifices for its 6 topside burners. The regulator is convertible between Natural Gas is rated at 5″ WC and LP is rated at 10″ WC.

These brass orifices are a replacement for appliances that use male threaded orifices. The larger orifices are used for the top side orifices and the broiler, and the special orifice jets that fit into the burner control knob assembly. The top side orifices are for the high heat function while the low heat is achieved through the bypass needle (located in the main control knob body).

Note: If you’re converting one of these ranges for propane used at high altitude, please contact seller.

This set includes 6 orifices and 6 bypass needles (jets) for a cooktop with 6 burners. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator. FOB origin.

This is a kit to convert the Dacor ESG486 and Dacor ESG 366 from Propane (LP) to Natural Gas. This range incorporates orifices for its 6 topside burners. The low heat function on the two largest burners use orifices that produce an ultra low BTU rating to enable delicate gourmet sauces to cook on low heat indefinitely. The regulator is convertible between Natural Gas is rated at 5″ WC and LP is rated at 10″ WC.

These brass orifices are a replacement for appliances that use male threaded orifices. The pointed orifices are for the top side and broiler, while the special orifice jets fit into the burner control knob assembly to control the low flame..

Note: If you’re converting a model for high altitude use, please contact seller.

This set includes 6 orifices and 6 bypass needles (jets) for a cooktop with 6 burners. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator. FOB origin.

This is a kit to convert the Dacor ESG486 and Dacor ESG 366 from Natural Gas to Propane (LP). This range incorporates orifices for its 6 topside burners. The low heat function on the two largest burners use orifices that produce an ultra low BTU rating to enable delicate gourmet sauces to cook on low heat indefinitely. The regulator is convertible between Natural Gas is rated at 5″ WC and LP is rated at 10″ WC.

These brass orifices are a replacement for appliances that use male threaded orifices. The larger orifices are used for the top side orifices and the broiler, and the special orifice jets that fit into the burner control knob assembly. The top side orifices produce 15,000 BTU for the upper burners and the low heat is achieved through the bypass needle (located in the main control knob body).

Note: If you’re converting one of these ranges for propane used at high altitude, please contact seller.

This set includes 6 orifices and 6 bypass needles (jets) for a cooktop with 6 burners. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator. FOB origin.

This kit is intended to specifically convert the Dacor model# HDER48S/NG range from Natural Gas to Propane (LP). This is a 48″ range with fired top side burners and a single electric oven below. These units have extreme precision specialty burners which use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the other orifice is used for high intensity heated cooking. There are 3 distinctly sized burners (2 of each type) with a staggered array on this unit and that required 6 distinct types of precision machined orifices, such as the ones in this kit. The propane output pressure at the regulator is rated at 10″ W.C., while the Natural Gas setting on this range is rated at 5″W.C.

It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual for details. FOB origin.

This kit is intended to specifically convert the Dacor model# HDPR36S/NG range from Propane (LP) to natural gas. This is a 36″ range with fired top side burners and a single electric oven below. These units have extreme precision specialty burners which use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the other orifice is used for high intensity heated cooking. There are 3 distinctly sized burners (2 of each type) with a staggered array on this unit and that required 6 distinct types of precision machined orifices, such as the ones in this kit. The propane output pressure at the regulator is rated at 10″ W.C., while the Natural Gas setting on this range is rated at 5″W.C.

It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual for details. FOB origin.

These are orifices specifically to convert a Dacor Model #OGC52 grille from natural gas to propane using the stock regulator rated set for propane rated at 10″ W.C. This unit has three main burners and a rotisserie burner under the hood with two side plate (stove style) burners on the side deck.

This set includes 6 orifices for a stove with up to 6 burners. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

This is a kit to convert the Dacor PGM365-1S from Propane (LP) to Natural Gas. This range incorporates orifices for its 5 topside burners. The low heat function on the two largest burners use orifices that produce an ultra low BTU rating to enable delicate gourmet sauces to cook on low heat indefinitely. The regulator is convertible, so Natural Gas is rated at 5″ WC and LP is rated at 10″ WC.

These brass orifices are a replacement for appliances that use male threaded orifices. The large teepee shaped orifices handle large burner (18,000 BTU – left front dual burner). The spuds consist of 2 orifces for the small 9,500 BTU burners – (left rear, right rear), and one for the medium 12,500 BTU burner (center rear).

This set includes 7 orifices for a cooktop with 5 burners. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator. FOB origin.