-
$392.19
This kit is specifically for the DCS RGS-366 range which has 6 topside burners with high and low orifices, and an oven with a broiler. The double burners at the top of this range are unparalleled when it comes to flame control throughout the sweep from ultra low flame to high flame.Other DCS range kits are available. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory conversion guide is included.
This set includes 14 orifices for a stove with up to 8 burners to convert this unit from natural gas to propane. This kit includes orfices for all 6 open top burners (2 for each 15,000 BTU (this is the propane rating for these burners) open top burner which is actually divided into two parts for each burner; 6 for the middle stove top simmer burners and 6 for the outer stove top high burners, one orifice for the main oven burner rated at 30,000 BTU, and one orifice for the broiler of 19,000 BTU. Contact seller if you range includes a 30,000 BTU WOK or a RGA broiler. The stock manifold output pressure for propane must be factory spec at 10.0″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.
International buyers, please inquire about international shipping rates before ordering. FOB origin.
-
$392.19
This listing is specifically for the DCS-RGS-485GD range to convert the unit for use with Natural Gas. Other DCS range kits are available. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory conversion guide is included.
This set includes 15 orifices for a stove with up to 10 burners to convert this unit from natural gas to propane. This kit includes orfices for all 5 open top burners (2 for each 17,500 to 18, 000 BTU – this is how the manufacturer describes the burner heat rating – open top burner which is actually divided into two parts for each burner; 5 for the low intensity middle stove top simmer burners, 5 for the outer stove top burners which require, two orifices for the griddle (or grille -depends on your set up) of 24,000 BTU, one orifice for the main oven with 30,000 BTU, one orifice for the 12 inch warming oven of 18,000 BTU, and one orifice for the broiler of 19,000 BTU. Contact seller if you range includes a 30,000 BTU WOK or a RGA broiler. The stock manifold output pressure for propane must be factory spec at 5.0″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.
International buyers, please inquire about international shipping rates before ordering. FOB origin.
-
$392.19
This listing is specifically for the DCS-RGS-485GD range to convert the unit for use with propane. Other DCS range kits are available. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory conversion guide is included.
This set includes 15 orifices for a stove with up to 10 burners to convert this unit from natural gas to propane. This kit includes orfices for all 5 open top burners (2 for each 15,000 BTU (this is the propane rating for these burners) open top burner which is actually divided into two parts for each burner; 5 for the middle stove top simmer burners and 5 for the outer stove top high burners, two orifices for the griddle (or grille -depends on your set up) of 24,000 BTU, one orifice for the main oven with 30,000 BTU, one orifice for the 12 inch warming oven of 18,000 BTU, and one orifice for the broiler of 19,000 BTU. Contact seller if you range includes a 30,000 BTU WOK or a RGA broiler. The stock manifold output pressure for propane must be factory spec at 10.0″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.
International buyers, please inquire about international shipping rates before ordering. FOB origin.
-
$340.40
This listing is specifically for the DCS-RGT-305 range to convert the unit from propane (LP) TO Natural Gas. Other DCS range kits are available. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory conversion guide is included.
This set includes 12 orifices for a stove with up to 7 burners (five of these burners use two orifices; one for high heat, the other for low heat) to convert this unit from natural gas to propane. This kit includes orifices for all 5 open top burners (2 for each 17,500 to 16, 000 BTU – this is how the manufacturer describes the burner heat rating – open top burner which is actually divided into two parts for each burner; 5 for the low intensity middle stove top simmer burners, and 5 for the outer stove top burners. The larger orifices are for the main oven with 30,000 BTU, and the other is for the broiler rated at 19,000 BTU. Contact seller if you range includes a 30,000 BTU WOK or a RGA broiler. The stock manifold output pressure for propane must be factory spec at 5.0″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.
International buyers, please inquire about international shipping rates before ordering. FOB origin.
-
$340.40
This listing is specifically for the DCS-RGT-305 range to convert the unit FROM NATURAL GAS TO PROPANE (LP). Other DCS range kits are available. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory conversion guide is included.
This set includes 12 orifices for a stove with up to 7 burners (five of these burners use two orifices; one for high heat, the other for low heat) to convert this unit from natural gas to propane. This kit includes orifices for all 5 open top burners (2 for each 17,500 to 16, 000 BTU – this is how the manufacturer describes the burner heat rating – open top burner which is actually divided into two parts for each burner; 5 for the low intensity middle stove top simmer burners, and 5 for the outer stove top burners. The larger orifices are for the main oven with 30,000 BTU, and the other is for the broiler rated at 19,000 BTU. Contact seller if you range includes a 30,000 BTU WOK or a RGA broiler. The stock manifold output pressure for propane must be factory spec at 5.0″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.
International buyers, please inquire about international shipping rates before ordering. FOB origin.
-
$340.35
These brass orifices are a replacement for converting the DCS RGTC-305-N from propane (LP) to natural gas (NG).
This set includes 12 orifices that are bored to size to fit this specific application for this specific unit. DCS cooktops come from the factory with a dual gas regulator rated at 10″W.C. (Propane) and 5″W.C. (Natural Gas) and they can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual. No other parts should be required to complete the conversion, so long as your stove uses a dual gas regulator.
This kit contains parts to convert each of the conventional topside burners. Each burner uses two orifices: the short one for the high heat flame and the long one for the low heat flame. The grille orifice is adjustable on this model, so one is NOT included in this kit.
International buyers, please inquire about international shipping rates before ordering. FOB origin.
-
$340.35
These brass orifices are a replacement for converting the DCS RGTC-305-N from natural gas to propane (LP).
This set includes 12 orifices that are bored to size to fit this specific application for this specific unit. DCS cooktops come from the factory with a dual gas regulator rated at 10″W.C. (Propane) and 5″W.C. (Natural Gas) and they can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual. No other parts should be required to complete the conversion, so long as your stove uses a dual gas regulator.
This kit contains parts to convert each of the conventional topside burners. Each burner uses two orifices: the short one for the high heat flame and the long one for the low heat flame. The grille orifice is adjustable on this model, so one is NOT included in this kit.
International buyers, please inquire about international shipping rates before ordering. FOB origin.
-
$459.30
This listing is specifically for the RGU-366-L range to convert the unit from Propane (LP) for use with Natural Gas. Other DCS range kits are available. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory conversion guide is included.
This set includes 14 orifices for a stove with up to 6 burners (each burner uses two orifices each – 1 for the low flame and 1 for the high flame), and orifices for the oven and broiler. The stock manifold output pressure for propane must be factory spec at 5.0″ W.C. Contact me if your regulator’s output pressure or you unit is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.
International buyers, please inquire about international shipping rates before ordering. FOB origin.
-
$459.30
This listing is specifically for the RGU-366-L range to convert the unit from Natural Gas to Propane. Other DCS range kits are available. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory conversion guide is included.
This set includes 14 orifices for a stove with up to 6 burners (each burner uses two orifices each – 1 for the low flame and 1 for the high flame), and orifices for the oven and broiler. The stock manifold output pressure for propane must be factory spec at 5.0″ W.C. Contact me if your regulator’s output pressure or you unit is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.
International buyers, please inquire about international shipping rates before ordering. FOB origin.
-
$101.70
This is a kit that will enable a conversion from Natural Gas to Propane on the Frigidaire FGC6X9X. The factory fuel regulator can be switched between 4″WC for Natural Gas to 10″WC for Propane (LP). This unit has 5 topside burners with three different heat ratings as follows; Left Front and Right Front (1 each) are rated at 11,000 BTU, center (1 burner) at 9,100 BTU, and Left Rear and Right Rear at 6,000 BTU. The kit will include two orifices for the 6,000 BTU burners, two orifices for the 11,000 BTU burners and one orifice for the 9,100 BTU Center burner.
It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. FOB origin.
-
$101.70
This is a kit that will enable a conversion from Natural Gas to Propane on the Frigidaire FGC6X9X. The factory fuel regulator can be switched between 4″WC for Natural Gas to 10″WC for Propane (LP). This unit has 5 topside burners with three different heat ratings as follows; Left Front and Right Front (1 each) are rated at 11,000 BTU, center (1 burner) at 9,100 BTU, and Left Rear and Right Rear at 6,000 BTU. The kit will include two orifices for the 6,000 BTU burners, two orifices for the 11,000 BTU burners and one orifice for the 9,100 BTU Center burner.
It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. FOB origin.
-
$163.90
These orifices are specifically for a Gaggenau KG103 which has four burners that produce 6,500 BTU (2 burners), 10,000 BTU and 12,650 BTU using the stock regulator rated set for natural gas rated at 6″ W.C. Many cooktops, free standing stoves, bar-b-ques, and rangetops use these types of orifices and they will retrofit a number of other units which usually feature a sealed burner design.
This set includes 4 orifices for a stove with up to 4 burners. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.
International buyers, please inquire about international shipping rates before ordering. FOB origin.
-
$163.90
These orifices are specifically for a Gaggenau KG103 which has four burners that produce 6500 BTU (2 burners), 10,000 BTU and 12650 BTU using the stock regulator rated set for propane (LP) rated at 10″ W.C. Many cooktops, free standing stoves, bar-b-ques, and rangetops use these types of orifices and they will retrofit a number of other units which usually feature a sealed burner design.
This set includes 4 orifices for a stove with up to 4 burners. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.
International buyers, please inquire about international shipping rates before ordering. FOB origin.
-
$91.80
These brass orifices fit JennAir model CVG 4280 and CVG 8130 units, but are also a replacement for converting singe, double or triple bay cooktops and rangetops regardless of brand from propane to natural gas, so long as the unit uses mixer tubes that fit over hooded orifices and fit the specified measurement and has burners with BTU ratings as specified in this listing with the proper gas regulator that will enable such a match. Please view my video link to see how to verify orifice size fitment for your specific unit:
http://www.youtube.com/watch?v=-FhPVHOZgkQ&feature=youtu.be
This set includes 4 orifices; two orifices for the burner grille, and two orifices for the standard burners. These cooktops usually come with a gas regulator that can be converted between natural gas and propane, and other manual adjustments must be made as well, so check your factory instruction manual. No other parts should be required to complete the conversion. Instructions from the JennAir installation manual are included with these orifices.
These orifices are bored to suit natural gas rated at 5″ WC using the factory regulator. Contact seller if your installation is different. International buyers; please check with seller for international shipping costs. FOB origin.
-
$91.80
These brass orifices fit JennAir model CVG 4280 and CVG 8130 units, but are also a replacement for converting singe, double or triple bay cooktops and rangetops regardless of brand from propane to natural gas, so long as the unit uses mixer tubes that fit over hooded orifices and fit the specified measurement and has burners with BTU ratings as specified in this listing with the proper gas regulator that will enable such a match. Please view my video link to see how to verify orifice size fitment for your specific unit:
http://www.youtube.com/watch?v=-FhPVHOZgkQ&feature=youtu.be
This set includes 4 orifices; two orifices for the burner grille, and two orifices for the standard burners. These cooktops usually come with a gas regulator that can be converted between natural gas and propane, and other manual adjustments must be made as well, so check your factory instruction manual. No other parts should be required to complete the conversion. Instructions from the JennAir installation manual are included with these orifices.
These orifices are bored to suit natural gas rated at 10″ WC using the factory regulator. Contact seller if your installation is different. International buyers; please check with seller for international shipping costs. FOB origin.
-
$91.80
These brass orifices fit JennAir model CCG406B and other units. These are replacements for converting single, double or triple bay cooktops and rangetops regardless of brand from propane to natural gas, so long as the unit uses mixer tubes that fit over hooded orifices and fit the specified measurement. Please view my video link to see how to verify orifice size fitment for your specific unit:
http://www.youtube.com/watch?v=-FhPVHOZgkQ&feature=youtu.be
These orifices fit JennAir models CCG406B models and others, so take measurements according to the video to see if these units will fit your application.
This set includes four orifices. These cooktops usually come with a gas regulator that can be converted between natural gas and propane, and other manual adjustments must be made as well, so check your factory instruction manual. No other parts should be required to complete the conversion. Instructions from the JennAir installation manual are included with these orifices. FOB origin.
 |
