This listing is specifically for the DCS RG-304 to convert the unit from propane to natural gas. Many cooktops, free standing stoves and range tops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory guide is included.

This kit includes orfices for all 4 open top burners (2 for each 16,000 BTU burner which are actually two-part burners: 6 orifices for the middle simmer burner, and 6 orifices for the outer high heat burners, one orifice for the broiler and one orifice for the main oven burner. Contact seller if you range includes different equipment. The stock manifold output pressure for natural gas must be factory spec at 5.0″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

These brass orifices are a replacement for converting the DCS RG-486GD from natural gas to propane (LP).

This set includes 15 orifices that are bored to size to fit this specific application for this specific unit. DCS cooktops come from the factory with a dual gas regulator rated at 10″W.C. (Propane) and 5″W.C. (Natural Gas) and they can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual. No other parts should be required to complete the conversion, so long as your stove uses a dual gas regulator.

This kit contains parts to convert each of the conventional topside burners. Each burner uses two orifices: the short one for the high heat flame and the long one for the low heat flame.

International buyers, please inquire about international shipping rates before ordering. FOB origin.

This listing is specifically for the RG-364GD to convert the unit from natural gas to propane. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory guide is included.

This kit includes orfices for all 4 open top burners (2 for each 16,000 BTU burner which are actually two part burners; 6 orifices for the middle simmer burner, and 6 orifices for the outer high heat burners, one orifice for the broiler, one orifice for the main oven burner and one orifice for the griddle. Contact seller if you range includes different equipment. The stock manifold output pressure for natural gas must be factory spec at 5.0″ W.C. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator.

International buyers, please inquire about international shipping rates before ordering. FOB origin.